List of F1-F9 Key Commands for the Command Prompt
F1 / right arrow: Repeats the letters of the last command line, one by one.
F2: Displays a dialog asking user to "enter the char to copy up to" of the last command line
F3: Repeats the last command line
F4: Displays a dialog asking user to "enter the char to delete up to" of the last command line
F5: Goes back one command line
F6: Enters the traditional CTRL+Z (^z)
F7: Displays a menu with the command line history
F8: Cycles back through previous command lines (beginning with most recent)
F9: Displays a dialog asking user to enter a command number, where 0 is for first command line entered.
Alt+Enter: toggle full Screen mode.
up/down: scroll thru/repeat previous entries
Esc: delete line
Note: The buffer allows a maximum of 50 command lines. After this number is reached, the first line will be replaced in sequence.
Helpful accessibility keyboard shortcuts
Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT +left SHIFT +PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds

ADDUSERS Add or list users to/from a CSV file
ARP Address Resolution Protocol
ASSOC Change file extension associations
ASSOCIAT One step file association
AT Schedule a command to run at a later time
ATTRIB Change file attributes

BOOTCFG Edit Windows boot settings
BROWSTAT Get domain, browser and PDC info

CACLS Change file permissions
CALL Call one batch program from another
CD Change Directory - move to a specific Folder
CHANGE Change Terminal Server Session properties
CHKDSK Check Disk - check and repair disk problems
CHKNTFS Check the NTFS file system
CHOICE Accept keyboard input to a batch file
CIPHER Encrypt or Decrypt files/folders
CleanMgr Automated cleanup of Temp files, recycle bin
CLEARMEM Clear memory leaks
CLIP Copy STDIN to the Windows clipboard.
CLS Clear the screen
CLUSTER Windows Clustering
CMD Start a new CMD shell
COLOR Change colors of the CMD window
COMP Compare the contents of two files or sets of files
COMPACT Compress files or folders on an NTFS partition
COMPRESS Compress individual files on an NTFS partition
CON2PRT Connect or disconnect a Printer
CONVERT Convert a FAT drive to NTFS.
COPY Copy one or more files to another location
CSVDE Import or Export Active Directory data

DATE Display or set the date
Dcomcnfg DCOM Configuration Utility
DEFRAG Defragment hard drive
DEL Delete one or more files
DELPROF Delete NT user profiles
DELTREE Delete a folder and all subfolders
DevCon Device Manager Command Line Utility
DIR Display a list of files and folders
DIRUSE Display disk usage
DISKCOMP Compare the contents of two floppy disks
DISKCOPY Copy the contents of one floppy disk to another
DNSSTAT DNS Statistics
DOSKEY Edit command line, recall commands, and create macros
DSADD Add user (computer, group..) to active directory
DSQUERY List items in active directory
DSMOD Modify user (computer, group..) in active directory

ECHO Display message on screen
ENDLOCAL End localisation of environment changes in a batch file
ERASE Delete one or more files
EXIT Quit the CMD shell
EXPAND Uncompress files
EXTRACT Uncompress CAB files

FC Compare two files
FDISK Disk Format and partition
FIND Search for a text string in a file
FINDSTR Search for strings in files
FOR /F Loop command: against a set of files
FOR /F Loop command: against the results of another command
FOR Loop command: all options Files, Directory, List
FORFILES Batch process multiple files
FORMAT Format a disk
FREEDISK Check free disk space (in bytes)
FSUTIL File and Volume utilities
FTP File Transfer Protocol
FTYPE Display or modify file types used in file extension associations

GLOBAL Display membership of global groups
GOTO Direct a batch program to jump to a labelled line

HELP Online Help
HFNETCHK Network Security Hotfix Checker

IF Conditionally perform a command
IFMEMBER Is the current user in an NT Workgroup
IPCONFIG Configure IP

KILL Remove a program from memory

LABEL Edit a disk label
LOCAL Display membership of local groups
LOGEVENT Write text to the NT event viewer.
LOGOFF Log a user off
LOGTIME Log the date and time in a file

MAPISEND Send email from the command line
MEM Display memory usage
MD Create new folders
MODE Configure a system device
MORE Display output, one screen at a time
MOUNTVOL Manage a volume mount point
MOVE Move files from one folder to another
MOVEUSER Move a user from one domain to another
MSG Send a message
MSIEXEC Microsoft Windows Installer
MSINFO Windows NT diagnostics
MSTSC Terminal Server Connection (Remote Desktop Protocol)
MUNGE Find and Replace text within file(s)
MV Copy in-use files

NET Manage network resources
NETDOM Domain Manager
NETSH Configure network protocols
NETSVC Command-line Service Controller
NBTSTAT Display networking statistics (NetBIOS over TCP/IP)
NETSTAT Display networking statistics (TCP/IP)
NOW Display the current Date and Time
NSLOOKUP Name server lookup
NTBACKUP Backup folders to tape
NTRIGHTS Edit user account rights

PATH Display or set a search path for executable files
PATHPING Trace route plus network latency and packet loss
PAUSE Suspend processing of a batch file and display a message
PERMS Show permissions for a user
PERFMON Performance Monitor
PING Test a network connection
POPD Restore the previous value of the current directory saved by PUSHD
PORTQRY Display the status of ports and services
PRINT Print a text file
PRNCNFG Display, configure or rename a printer
PRNMNGR Add, delete, list printers set the default printer
PROMPT Change the command prompt
PsExec Execute process remotely
PsFile Show files opened remotely
PsGetSid Display the SID of a computer or a user
PsInfo List information about a system
PsKill Kill processes by name or process ID
PsList List detailed information about processes
PsLoggedOn Who's logged on (locally or via resource sharing)
PsLogList Event log records
PsPasswd Change account password
PsService View and control services
PsShutdown Shutdown or reboot a computer
PsSuspend Suspend processes
PUSHD Save and then change the current directory

QGREP Search file(s) for lines that match a given pattern.

RASDIAL Manage RAS connections
RASPHONE Manage RAS connections
RECOVER Recover a damaged file from a defective disk.
REG Read, Set or Delete registry keys and values
REGEDIT Import or export registry settings
REGSVR32 Register or unregister a DLL
REGINI Change Registry Permissions
REM Record comments (remarks) in a batch file
REN Rename a file or files.
REPLACE Replace or update one file with another
RD Delete folder(s)
RDISK Create a Recovery Disk
RMTSHARE Share a folder or a printer
ROBOCOPY Robust File and Folder Copy
ROUTE Manipulate network routing tables
RUNAS Execute a program under a different user account
RUNDLL32 Run a DLL command (add/remove print connections)

SC Service Control
SCHTASKS Create or Edit Scheduled Tasks
SCLIST Display NT Services
ScriptIt Control GUI applications
SET Display, set, or remove environment variables
SETLOCAL Control the visibility of environment variables
SETX Set environment variables permanently
SHARE List or edit a file share or print share
SHIFT Shift the position of replaceable parameters in a batch file
SHORTCUT Create a windows shortcut (.LNK file)
SHOWGRPS List the NT Workgroups a user has joined
SHOWMBRS List the Users who are members of a Workgroup
SHUTDOWN Shutdown the computer
SLEEP Wait for x seconds
SOON Schedule a command to run in the near future
SORT Sort input
START Start a separate window to run a specified program or command
SU Switch User
SUBINACL Edit file and folder Permissions, Ownership and Domain
SUBST Associate a path with a drive letter
SYSTEMINFO List system configuration

TASKLIST List running applications and services
TIME Display or set the system time
TIMEOUT Delay processing of a batch file
TITLE Set the window title for a CMD.EXE session
TOUCH Change file timestamps
TRACERT Trace route to a remote host
TREE Graphical display of folder structure
TYPE Display the contents of a text file

USRSTAT List domain usernames and last login

VER Display version information
VERIFY Verify that files have been saved
VOL Display a disk label

WHERE Locate and display files in a directory tree
WHOAMI Output the current UserName and domain
WINDIFF Compare the contents of two files or sets of files
WINMSD Windows system diagnostics
WINMSDP Windows system diagnostics II
WMIC WMI Commands

XCACLS Change file permissions
XCOPY Copy files and folders

To copy and paste MS-DOS text using the mouse

>Open the Command Prompt window.

>Right-click the title bar of the command prompt window, and then click Properties.

>On the Options tab, under Edit Options, select the QuickEdit Mode check box if it isn't already selected, and then click OK.

>In the Apply Properties To Shortcut dialog box, click either of the following:

>Apply properties to current window only to use QuickEdit mode in the current window.
>Modify shortcut that started this window to apply QuickEdit mode every time you start the MS-DOS-based program.

>Click OK.
>Click and drag the mouse pointer over the text you want to copy in the command prompt window.

>Position the cursor where you want the text to be inserted, and then do either of the following:

>In an MS-DOS-based program, right-click the title bar, click Edit, and then click Paste.
>In a Windows-based program, click the Edit menu, and then click Paste.

Notes

>QuickEdit mode is not available in all MS-DOS-based programs.

>You cannot paste text into a command prompt window or MS-DOS-based program when it is running in a full screen.

Select a TrueType font to use in the command prompt

Some languages require you to use a TrueType font when you type characters at the command prompt. To select a TrueType font, follow these steps:

>Open Command Prompt, if you have not already done so.

>On the System menu, click Properties.

>On the Font tab, under Font, click a TrueType font, such as Lucida Console, and then click OK.

>In the Apply Properties To Shortcut dialog box, do one of the following:

>To use the TrueType font for only this session, click Apply properties to current window only.

>To always use the TrueType font you selected, click Modify shortcut that started this window.

Note

To open a command prompt, click Start, point to All Programs, point to Accessories, and then click Command Prompt. or Start-> Run-> CMD

Friends Hide your folders with out using any soft
just go to

run.....>

cmd....>

note 1 "_" give 1 space on that place

note 2 ex:- if your folder is at D drive then

-->first you D: and press enter after you write below command

-->Attrib "your folder name"_+r_+a_+s_+h

-->enter

-->if you want to view that folder then

you write same command use with -

like -->attrib "your folder name"_–r_–a_–s_–h

For example:

->first you D: and press enter after you write below command

-->Attrib "Wehackers"_+r_+a_+s_+h

-->enter

-->if you want to view that folder then

you write same command use with -

like -->attrib "Wehackers"_–r_–a_–s_–h

Note:
replace "_" by space

Hack....................................
Boot anyone's xp computer who has a limited account active (i.e. guest) When you boot, boot to safe mode w/ dos prompt. (push F8 during startup) Type

C:\cd windows\system 32

(for a nice matrix touch, I would also type this)

color 0a

While still in system32 type:

command userpasswords2

Then unselect the box that says "this computer requires a password etc."
Reboot!

Congrats- You just hacked XP

ENTERING DEBUG

Debug has been included in every version of MS-DOS as well as Windows. When running any of the debug routines it is recommended that if you have Windows that you exit or shut down to get into a real DOS prompt (unless you're running Windows ME, Windows 2000, Windows XP, or later versions).



Once at the MS- DOS prompt, run through the below example, this example is perfectly fine to run on any PC Computer running MS-DOS / Windows and will not harm anything.
Type debug and press enter.
This should get you to a - (small dash). This is the debug prompt.
At the - type d40:00 and press enter; this will return several lines of information.
After the feedback you will be back to the debug prompt.
To exit out of debug type q and press enter. This will return you back to the MS-DOS prompt.


In some of the below debug routines you will notice that a "g" is typed, then "q". G tells the computer that the code type is not self executing and must be run at this point. If completed, the program will return Program Terminated Normally which indicates you can now quit from the debug program.
TESTING PORTS


The below debug routine will check the ports of the computer to allow you to know if ports are being detected or not. Type debug to get to the "-" Type D40:0
You should get several lines; however, the first line is the only important line, which should read the following:
0040:0000 F8 03 F8 02 E8 03 E8 02 - 78 03 78 02 BC 03
F8 03
F8 02
E8 03
E8 02

78 03
78 02
BC 03
COM1
COM2
COM3
COM4

LPT1
LPT2
LPT3
The above graph shows you what the feed back means as far as port, so if you see F8 03, this would be an indication that COM1 is being detected; if you see 00 00, this is an indication that it is not being detected, which could mean that hardware is bad or that it is disabled inCMOS
Once you have finished looking at the information, type Q and press enter to get out of Debug.
CLEAR CMOS


The below debug routine will clear CMOS, BIOS, Passwords, Settings, Viruses, and other items residing in the CMOS. During this process you may get returned characters which are an indication that the string has gone in, if you by chance get ERROR ensure that you have typed the line in correctly, if not retype. Ensure that you do not skip any lines, that it is ALL typed in correctly to help prevent problems. Before running this Debug routine also ensure that you have read the above disclaimer. After typing debug you will get "-" which is were you can begin by typing A and pressing enter. A
MOV AX,0
MOV AX,CX
OUT 70,AL
MOV AX,0
OUT 71,AL
INC CX
CMP CX,100
JB 103
INT 20
Note: Nothing is typed on this line
G By pressing G this will execute the above script, ensure you have read and agree to the above disclaimer.
Q Then reboot and you will get a Setup Checksum Error. Go into setup, correct all the incorrect values, time, date...
JOYSTICK TEST


This test will test to see if your Joystick is present or not. Type debug from the DOS prompt once at the "-". Type i201 If you get a FF response attempt hold one of the main buttons on your joystick, and while holding the button down type i201 and see if a different response is given, each button on the joystick should return a different response. However, some special joysticks, such as the Microsoft Sidewinder, which has more than 4-5 buttons, may not return a response for all extra buttons because these buttons are generally controlled through software. If a FF is still given on each of the buttons on the game paddle or joystick, it is a good possibility that either the Joystick and or the Joystick port is bad. If possible, attempt these steps with another known working joystick. However, if you are receiving different responses when pressing and holding the keys on the joystick, the computer hardware is working properly. Type q and press enter to quit out of debug.

ERASING SECTOR 2


Before doing the below routine ensure that you have read our disclaimer and that you're sure that this is safe to do on your hard drive. Some computer hard drive manufacturers may void your warranty if this routine is ran or in some situations this can cause damage to the hard drive. This routine is useful in clearing DDO and unknown partitions. If this routine completes successfully it will erase everything in Sector 2. In the below debug routine, only type what is in bold from line 3 to 9, you will get a response if typed in properly. If you get a response continue to type the bold text as shown below in the below example.
A:\>debug
-FCS:200 400 0
-ACS:100
-xxxx:0100 mov ax,302
-xxxx:0103 mov bx,200
-xxxx:0106 mov cx,2
-xxxx:0109 mov dx, 80
-xxxx:010a int 13
-xxxx:010c int 20
-xxxx:0110 (without typing anything)
-g
Program terminated normally.
-q

ERASE ALL HDD INFORMATION


This debug routine is used to erase all partition information on the hard disk drive and is only recommend for experienced users or users who are unable to delete the partition information through fdisk. In the below debug routine, only type what is in bold from line 3 to 8, you will get a response if typed in properly. If you get a response continue to type the bold text as shown below in the below example. A:\>debug
-F 200 L1000 0
-A CS:100
xxxx:0100 MOV AX,301
xxxx:0103 MOV BX,200
xxxx:0106 MOV CX,1
xxxx:0109 MOV DX,80 (80 for hd 0 or 81 for hd 1 ) xxxx:010C INT 13
xxxx:010E INT 20
xxxx:0110
-g
Program terminated normally
-q Once this debug routine is complete, reboot computer and all partitions should be erased. Before anything can be installed back onto the computer you must run Fdisk and recreate the partition as well as format the hard disk drive.

ERASE HDD AND CLEAR CMOS

Before doing the below routine ensure that you read our disclaimer as well as are sure that this is safe to do on your hard drive. Some computer hard drive manufacturers may void your warranty or this may cause damage to the hard drive when doing the below example. This routine is useful in clearing DDO and removing possible viruses. If this routine completes successfully it will erase everything from your Hard Drive as well as your reset your CMOS values. In the below debug routine, only type what is in bold from line 3 to 17, you will get a response if typed in properly. If you get a response continue to type the bold text as shown below in the below example.
A:\>debug
-fcs:200 400 0
-acs:100
-xxxx:0100 mov ax, 0
-xxxx:0103 mov ax, cx
-xxxx:0105 out 70, al
-xxxx:0107 mov ax, 0
-xxxx:010a out 71,al
-xxxx:010c inc cx
-xxxx:010d cmp cx,100
-xxxx:0111 jb 103
-xxxx:0113 mov ax,302
-xxxx:0116 mov bx,200
-xxxx:0119 mov cx,1
-xxxx:011c mov dx,80
-xxxx:011f int 13
-xxxx:012l int 20
-xxxx:0123 (without typing anything.)
-g program terminated normally
If you are doing this debug routine to clear out a possible virus turn off your computer and wait and turn back on.
-q
Once back at DOS, reboot your computer When your computer comes back on from doing the above you will get an error message as booting up the computer, such as "Invalid Configuration". You must enter CMOS and set the time and date, save, and reboot again. Once rebooted, you will then need to run fdisk and recreate the partitions. Once created, you will then need to format the hard drive and proceed as normal.
DISCHARGE OLD LAPTOP BATTERIES


The below debug routine is used for older laptop batteries (i.e. batteries made from 1990-1992), we do not recommend using this routine on any newer laptop batteries or any NiMH batteries N DPDISCHG.COM
A
MOV DX,01E8
MOV AL,F9
OUT DX,AL
INT 20

RCX
10
W
Q This will write dpdischg.com to the current directory. To run this utility type dpdischg.
REBOOT YOUR COMPUTER


Implement this debug routine to reboot your computer. DEBUG E 40:72 34 12
RCS
FFFF
RIP
0000
G To create a batch file that reboots your computer without having to type the above command each time, use the below example. GOTO BEGIN

E 40:72 34 12
RCS
FFFF
RIP
0000
G

:BEGIN
DEBUG < REBOOT.BAT
CREATE A SLEEP FILE


This file allows your computer to sleep for a specified amount of time. This file is not dangerous in any way; if typed improperly, more than likely the file will just not work. Type Debug You should get a "-" begin typing the below information; after each line you may get a response, do not press enter and type the next line after the response. N SLEEP.COM
A 100
MOV SI,0082
MOV AX,[SI]
XCHG AH,AL
XOR AX,3030
MOV BL,AL
MOV AL,0A
MUL AH
ADD AX,BX
MOV SI,AX
MOV AH,2C
INT 21
MOV BL,DH
MOV AX,SI
AAM
OR AX,3030
XCHG AH,AL
MOV [0160],AX
MOV AH,09
MOV DX,0160
INT 21
MOV AH,06
MOV DL,FF
INT 21
JZ 014C
OR AL,AL
JNZ 013F
MOV AH,08
INT 21
MOV AL,FF
MOV DX,016C
PUSH AX
MOV AH,09
INT 21
POP AX
MOV AH,4C
INT 21
MOV AH,2C
INT 21
CMP BL,DH
JZ 012D
MOV BL,DH
DEC SI
JNZ 011A
SUB AL,AL
MOV DX,016C
JMP 0142
DB "XX SECONDS", D, 24
DB " ", D, A, 24 RCX
79
W
Q Tip: You may cut and paste the above test into a notepad document and save the file with a .scr extension. Once saved from DOS, type debug < name of scrSLEEP.COM. which should create the file; should be created

CHECK BIOS DATE


The below debug routine is to check the date of your BIOS. All BIOS dates on PC compatible computers is stored at memory address FFFF5h. To display the date of your BIOS do the following: At the C:\> type debug - d FFFF:5 L 8 After typing the above command you should receive a string similar to: FFFF:0000 30 34 2F-33 30 2F 39 38 4/30/98 The 4/30/98 would be the date of your computer BIOS.

VIDEO CARD TYPE

The below debug routine will list the type of video card within your computer. This is an excellent way of determining the chipset on the card or the card within your computer without opening the computer. At the C:\> type debug -d c000:0040 After typing the above command you should receive several lines of text similar to:
C000:0040

00
00
00
00
00
00
00
00
-
00
00
00
00
00
00
00
00

................
C000:0050


E9
63
7B
00
B4
10
49
27
-
E9
FE
2B
E9
F7
2B
50
4D


.c{...I'..+..+PM
C000:0060


49
44
58
00
5B
00
00
00
-
00
A0
00
B0
00
B8
00
C0


IDX.[...........
C000:0070


00
5B
53
54
42
20
6E
56
-
49
44
49
41
20
54
4E
54


.[STB nVIDIA TNT
C000:0080


20
76
65
72
2E
20
31
2E
-
31
30
20
0D
0A
00
1B
43


ver. 1.10 ....C
C000:0090


6F
70
79
72
69
67
68
74
-
28
43
29
31
39
39
38
20


opyright(C)1998
C000:00A0


53
54
42
20
53
79
73
74
-
65
6D
73
20
49
6E
63
0D


STB Systems Inc.
C000:00B0


0A
00
22
6C
2C
0A
01
00
-
C3
50
24
7F
E8
60
36
58


.."1,....P$..'6X
As you can pick out in the above dump, this gives you enough information to determine the make and the year made on the video card. On line 4 you can see the make of this video card, which in this case is a N VIDIA TNT which would be the Riva TNT chipset. The next line you notice the version of the card and finally the line thereafter is the copyright or the year manufactured, generally. If you are unable to capture any information which sounds like the video card, you can also type -d c000:0090

SYNTAX Sets the default console foreground and background colors.
COLOR [attr]

attr Specifies color attribute of console output

Color attributes are specified by TWO hex digits -- the first corresponds to the background; the second the foreground. Each digit can be any of the below values.
0 = Black
8 = Gray
1 = Blue
9 = Light Blue
2 = Green
A = Light Green
3 = Aqua
B = Light Aqua
4 = Red
C = Light Red
5 = Purple
D = Light Purple
6 = Yellow
E = Light Yellow
7 = White
F = Bright White
If no argument is given, this command restores the color to what it was when CMD.EXE started. This value either comes from the current console window, the /T command line switch or from the DefaultColor registry value. The COLOR command sets ERRORLEVEL to 1 if an attempt is made to execute the COLOR command with a foreground and background color that are the same.

EXAMPLE
Color 2A = Creates a green background with light bright green text, similar to many of the FTP, telnet, and old BBS console screens.
Valid for a session only

Full Codes. Kindly Add if U know more !



Accessibility Controls
access.cpl
Add Hardware Wizard
hdwwiz.cpl
Add/Remove Programs
appwiz.cpl
Administrative Tools
control admintools
Automatic Updates
wuaucpl.cpl
Bluetooth Transfer Wizard
fsquirt
Calculator
calc
Certificate Manager
certmgr.msc
Character Map
charmap
Check Disk Utility
chkdsk
Clipboard Viewer
clipbrd
Command Prompt
cmd
Component Services
dcomcnfg
Computer Management
compmgmt.msc
timedate.cpl
ddeshare
Device Manager
devmgmt.msc
Direct X Control Panel (If Installed)*
directx.cpl
Direct X Troubleshooter
dxdiag
Disk Cleanup Utility
cleanmgr
Disk Defragment
dfrg.msc
Disk Management
diskmgmt.msc
Disk Partition Manager
diskpart
Display Properties
control desktop
Display Properties
desk.cpl
Display Properties (w/Appearance Tab Preselected)
control color
Dr. Watson System Troubleshooting Utility
drwtsn32
Driver Verifier Utility
verifier
Event Viewer
eventvwr.msc
File Signature Verification Tool
sigverif
Findfast
findfast.cpl
Folders Properties
control folders
Fonts
control fonts
Fonts Folder
fonts
Free Cell Card Game
freecell
Game Controllers
joy.cpl
Group Policy Editor (XP Prof)
gpedit.msc
Hearts Card Game
mshearts
Iexpress Wizard
iexpress
Indexing Service
ciadv.msc
Internet Properties
inetcpl.cpl
IP Configuration (Display Connection Configuration)
ipconfig /all
IP Configuration (Display DNS Cache Contents)
ipconfig /displaydns
IP Configuration (Delete DNS Cache Contents)
ipconfig /flushdns
IP Configuration (Release All Connections)
ipconfig /release
IP Configuration (Renew All Connections)
ipconfig /renew
IP Configuration (Refreshes DHCP & Re-Registers DNS)
ipconfig /registerdns
IP Configuration (Display DHCP Class ID)
ipconfig /showclassid
IP Configuration (Modifies DHCP Class ID)
ipconfig /setclassid
Java Control Panel (If Installed)
jpicpl32.cpl
Java Control Panel (If Installed)
javaws
Keyboard Properties
control keyboard
Local Security Settings
secpol.msc
Local Users and Groups
lusrmgr.msc
Logs You Out Of Windows
logoff
Microsoft Chat
winchat
Minesweeper Game
winmine
Mouse Properties
control mouse
Mouse Properties
main.cpl
Network Connections
control netconnections
Network Connections
ncpa.cpl
Network Setup Wizard
netsetup.cpl
Notepad
notepad
Nview Desktop Manager (If Installed)
nvtuicpl.cpl
Object Packager
packager
ODBC Data Source Administrator
odbccp32.cpl
On Screen Keyboard
osk
Opens AC3 Filter (If Installed)
ac3filter.cpl
Password Properties
password.cpl
Performance Monitor
perfmon.msc
Performance Monitor
perfmon
Phone and Modem Options
telephon.cpl
Power Configuration
powercfg.cpl
Printers and Faxes
control printers
Printers Folder
printers
Private Character Editor
eudcedit
Quicktime (If Installed)
QuickTime.cpl
Regional Settings
intl.cpl
Registry Editor
regedit
Registry Editor
regedit32
Remote Desktop
mstsc
Removable Storage
ntmsmgr.msc
Removable Storage Operator Requests
ntmsoprq.msc
Resultant Set of Policy (XP Prof)
rsop.msc
Scanners and Cameras
sticpl.cpl
Scheduled Tasks
control schedtasks
Security Center
wscui.cpl
Services
services.msc
Shared Folders
fsmgmt.msc
Shuts Down Windows
shutdown
Sounds and Audio
mmsys.cpl
Spider Solitare Card Game
spider
SQL Client Configuration
cliconfg
System Configuration Editor
sysedit
System Configuration Utility
msconfig
System File Checker Utility (Scan Immediately)
sfc /scannow
System File Checker Utility (Scan Once At Next Boot)
sfc /scanonce
System File Checker Utility (Scan On Every Boot)
sfc /scanboot
System File Checker Utility (Return to Default Setting)
sfc /revert
System File Checker Utility (Purge File Cache)
sfc /purgecache
System File Checker Utility (Set Cache Size to size x)
sfc /cachesize=x
System Properties
sysdm.cpl
Task Manager
taskmgr
Telnet Client
telnet
User Account Management
nusrmgr.cpl
Utility Manager
utilman
Windows Firewall
firewall.cpl
Windows Magnifier
magnify
Windows Management Infrastructure
wmimgmt.msc
Windows System Security Tool
syskey
Windows Update Launches
wupdmgr
Windows XP Tour Wizard
tourstart
Wordpad
write
Run line commands can be very useful some times, its better to know them here are all the commands that i know u might find them usefull too Commands are same for Windows xp pro and home
Run Line Commands

These are GUI applications that can be opened from the run line.
These applications are not located in the C:\windows\system32\ directory, the
keys for these applications are located in the registry under:
HKLM\software\microsoft\windows\currentversion\app paths
BCKGZM.EXE - Backgammon
CHKRZM.EXE - Checkers
CONF.EXE - NetMeeting
DIALER.EXE - Phone Dialer
HELPCTR.EXE - Help and Support
HRTZZM.EXE - Internet Hearts
HYPERTRM.EXE - HyperTerminal
ICWCONN1.EXE - Internet Connection Wizard
IEXPLORE.EXE - Internet Explorer
INETWIZ.EXE - Setup Your Internet Connection
INSTALL.EXE - User's Folder
MIGWIZ.EXE - File and Settings Transfer Wizard
MOVIEMK.EXE - Windows Movie Maker
MPLAYER2.EXE - Windows Media Player Version 6.4.09.1120
MSCONFIG.EXE - System Configuration Utility
MSIMN.EXE - Outlook Express
MSINFO32.EXE - System Information
MSMSGS.EXE - Windows Messenger
MSN6.EXE - MSN Explorer
PBRUSH.EXE - Paint
PINBALL.EXE - Pinball
RVSEZM.EXE - Reversi
SHVLZM.EXE - Spades
TABLE30.EXE - User's Folder
WAB.EXE - Windows Address Book
WABMIG.EXE - Address Book Import Tool
WINNT32.EXE - User's Folder
WMPLAYER.EXE - Windows Media Player
WRITE.EXE - Wordpad

These .EXE files reside in (c:\windows\system32\) or (c:\windows\) directory.
ACCWIZ.EXE - Accessibility Wizard
CALC.EXE - Calculator
CHARMAP.EXE - Character Map
CLEANMGR.EXE - Disk Space Cleanup Manager
CLICONFG.EXE - SQL Client Configuration Utility
CLIPBRD.EXE - Clipbook Viewer
CLSPACK.EXE - Class Package Export Tool
CMD.EXE - Command Line
CMSTP.EXE - Connection Manager Profile Installer
CONTROL.EXE - Control Panel
DCOMCNFG.EXE - Component Services
DDESHARE.EXE - DDE Share
DRWATSON.EXE - Doctor Watson v1.00b
DRWTSN32.EXE - Doctor Watson Settings
DVDPLAY.EXE - DVD Player
DXDIAG.EXE - DirectX Diagnostics
EUDCEDIT.EXE - Private Character Editor
EVENTVWR.EXE - Event Viewer
EXPLORER.EXE - Windows Explorer
FREECELL.EXE - Free Cell
FXSCLNT.EXE - Fax Console
FXSCOVER.EXE - Fax Cover Page Editor
FXSEND.EXE - MS Fax Send Note Utility
IEXPRESS.EXE - IExpress 2.0
LOGOFF.EXE - System Logoff
MAGNIFY.EXE - Microsoft Magnifier
MMC.EXE - Microsoft Management Console
MOBSYNC.EXE - Microsoft Synchronization Manager
MPLAY32.EXE - Windows Media Player version 5.1
MSHEARTS.EXE - Hearts
MSPAINT.EXE - Paint
MSTSC.EXE - Remote Desktop Connection
NARRATOR.EXE - Microsoft Narrator
NETSETUP.EXE - Network Setup Wizard
NOTEPAD.EXE - Notepad
NSLOOKUP.EXE - NSLookup Application
NTSD.EXE - Symbolic Debugger for Windows 2000
ODBCAD32.EXE - ODBC Data Source Administrator
OSK.EXE - On Screen Keyboard
OSUNINST.EXE - Windows Uninstall Utility
PACKAGER.EXE - Object Packager
PERFMON.EXE - Performance Monitor
PROGMAN.EXE - Program Manager
RASPHONE.EXE - Remote Access Phonebook
REGEDIT.EXE - Registry Editor
REGEDT32.EXE - Registry Editor
RESET.EXE - Resets Session
RSTRUI.EXE - System Restore
RTCSHARE.EXE - RTC Application Sharing
SFC.EXE - System File Checker
SHRPUBW.EXE - Create Shared Folder
SHUTDOWN.EXE - System Shutdown
SIGVERIF.EXE - File Signature Verification
SNDREC32.EXE - Sound Recorder
SNDVOL32.EXE - Sound Volume
SOL.EXE - Solitaire

SPIDER.EXE - Spider Solitaire
SYNCAPP.EXE - Create A Briefcase
SYSEDIT.EXE - System Configuration Editor
SYSKEY.EXE - SAM Lock Tool
TASKMGR.EXE - Task Manager
TELNET.EXE - MS Telnet Client
TSSHUTDN.EXE - System Shutdown
TOURSTART.EXE - Windows Tour Launcher
UTILMAN.EXE - System Utility Manager
USERINIT.EXE - My Documents
VERIFIER.EXE - Driver Verifier Manager
WIAACMGR.EXE - Scanner and Camera Wizard
WINCHAT.EXE - Windows for Workgroups Chat
WINHELP.EXE - Windows Help Engine
WINHLP32.EXE - Help
WINMINE.EXE - Minesweeper
WINVER.EXE - Windows Version Information
WRITE.EXE - WordPad
WSCRIPT.EXE - Windows Script Host Settings
WUPDMGR.EXE - Windows Update

The following are Control Panel applets that can be run from the run line.
They are located in the c:\windows\system32 directory, and have the file type
extension ".CPL".
ACCESS.CPL - Accessibility Options
APPWIZ.CPL - Add or Remove Programs
DESK.CPL - Display Properties
HDWWIZ.CPL - Add Hardware Wizard
INETCPL.CPL - Internet Explorer Properties
INTL.CPL - Regional and Language Options
JOY.CPL - Game Controllers
MAIN.CPL - Mouse Properties
MMSYS.CPL - Sounds and Audio Device Properties
NCPA.CPL - Network Connections
NUSRMGR.CPL - User Accounts
ODBCCP32.CPL - ODBC Data Source Administrator
POWERCFG.CPL - Power Options Properties
SYSDM.CPL - System Properties
TELEPHON.CPL - Phone and Modem Options
TIMEDATE.CPL - Date and Time Properties
The following are Microsoft Management Console Snap-ins that can be opened from
the run line. These applications have the file type extension ".MSC".
CERTMGR.MSC - Certificates
CIADV.MSC - Indexing Service
COMPMGMT.MSC - Computer Management
DEVMGMT.MSC - Device Manager
DFRG.MSC - Disk Defragmenter
DISKMGMT.MSC - Disk Management
EVENTVWR.MSC - Event Viewer
FSMGMT.MSC - Shared Folders
LUSRMGR.MSC - Local Users and Groups
NTMSMGR.MSC - Removable Storage
NTMSOPRQ.MSC - Removable Storage Operator Requests
PERFMON.MSC - Performance Monitor
SERVICES.MSC - Services
WMIMGMT.MSC - Windows Management Infrastructure



Calculation on command Prompt ! u knew dis???

The command processor CMD.EXE comes with a mini-calculator that can perform simple arithmetic on 32-bit signed integers:

C:\>set /a 2+2
4
C:\>set /a 2*(9/2)
8
C:\>set /a (2*9)/2
9
C:\>set /a "31>>2"
7

Note that we had to quote the shift operator since it would otherwise be misinterpreted as a "redirect stdout and append" operator.

For more information, type set /? at the command prompt.